
The Console’s Swimming Menus and Settings
Show DQ
This menu selects the DQ information to display.
Press [←] or [→] to select only to display the DQ on the time field or to display the DQ in the
place field and the time in the time field.
Show Start
This menu determines if the start reaction time is displayed.
Press [←] or [→] to select YES or NO. If the console is set at YES, the scoreboard shows the
start reaction time.
Show Place
This menu determines whether or not to display split time.
Press [←] or [→] to select YES or NO. If the console is set at YES, the scoreboard shows the
swimmer‘s place and split time.
RTD Offset
This menu will add 0K, 5K, 10K, or 15K to the RTD data being
sent to the matrix display.
Use the [↑] or [↓] to toggle through the RTD offset settings (0K, 5K, 10K or 15K). 0K is no
offset and 5K adds 5000 to the item numbers. To save the setting, press [Enter].
When to use this:
If data from more than one pool/OS2000 is going to one display.
If using a Daktronics Venus 1500 M2 or M3 controlled display, this menu allows
multiple RTD input directly into the display.
The following Comm Ports menus select the protocol used for
transmitting data to the display and communicating with a
results program.
MENU-RTD/MATRIX
9-RTD/OFFSET
From Main Menu – [4]>[3]>[2]
MENU-RTD/MATRIX
RTD OFFSET: 5K*
MENU-RTD/MATRIX
6-SHOW DQ
From Main Menu – [4]>[3]>[2]>[6]
MENU-RTD/MATRIX
7-SHOW START
From Main Menu – [4]>[3]>[2]>[7]
MENU-RTD/MATRIX
8-SHOW PLACE
SHOW PLACE
FOR SPLITS=YES*
From Main Menu – [4]>[3]>[2]>[8]
From Main Menu – [4]>[3]>[2]>[9]
MENU-RTD/MATRIX
RTD OFFSET: 5K*
Kommentare zu diesen Handbüchern