
Numeric Scoreboard Menu
This menu configures the numeric scoreboard.
Press [Enter] to select the number of lines on
the display.
Use [0]-[9] to enter desired lines then press [Enter]. If the number of active lanes in the pool is
greater than the value set, the timer will automatically page the information in place order
according to the time set in the FIN PAGE TIME (Default=10).
Matrix Scoreboard Menu
This menu will add 0K, 5K, 10K, or 15K to the RTD data
being sent to the matrix display.
Use a [↑] or [↓] to toggle through the RTD offset # settings (0K, 5K, 10K or 15K). 0K uses no
offset and 5K adds 5000 to the item #. To save the setting, press [Enter].
When to use this:
If using a Daktronics Venus 1500 M2 or M3 controlled display, this menu allows
multiple RTD input directly into the display.
If data from more than one OmniSport console is going to one display.
Comm Ports
The following Comm (Communication) Ports menu sets
the protocol used for transmitting data to the display
and communicating with a results program.
Scoreboard Outputs
This menu selects which protocol (Multidrop, Multiline, Multicast, or Omega) will be
transmitted out of the scoreboard outputs (J2 and J3). Use the arrow keys to select the output
then press [Enter].
Note: To identify a display as either Multiline or Multidrop, power up the scoreboard with
the signal disconnected. If the Lane and Place digits show P0, the scoreboard is a Multidrop
display. If the digits show P1, the scoreboard is Multiline.
MENU-NUMERIC
1-# OF LINES
MENU-COMM PORTS
1-SCBD OUTPUTS
MENU-COMM PORTS
SCBD: MULTILINE*
From Main Menu [4]>[3]>[1]
MENU-SCOREBOARD
1-NUMERIC
From Main Menu [4]>[2]>[2]
MENU-RTD/MATRIX
1-RTD OFFSET
MENU-RTD/MATRIX
RTD OFFSET: 5K*
MENU-RTD/MATRIX
RTD OFFSET: 5K*
From Main Menu [4]>[2]>[1]
Kommentare zu diesen Handbüchern