Daktronics Digital Billboard Photocell, Light Sensor, and Web Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Monitore Daktronics Digital Billboard Photocell, Light Sensor, and Web herunter. Daktronics Digital Billboard Photocell, Light Sensor, and Webcam Cleaning Procedures User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Quick Guide: Digital Billboard Photocell, Light Sensor, and
Webcam Cleaning Procedures 1 of 3
PO Box 5128 331 32
n
d
Ave, Brookings, SD 57006-5128
tel: 605-697-4036 or 800-325-8766 fax: 605-697-4700
www.daktronics.com
DD1509618 Rev 1
18 April 2013
Photocell Cleaning
On older displays, photocells ensure the display is at the appropriate brightness level for the time of the
day and for the lighting conditions. Ensuring the photocell is clean and functioning properly is crucial for
display performance and also ensures the display complies with local sign codes.
Photocell Inspection
At each visit to the sign, inspect the photocell for excess dirt. Also inspect the flat areas between the
photocell plates as this is where dirt is likely to accumulate. Refer to Figure 1 for an example of a dirty
photocell.
Required Equipment
Required Equipment
Dish Soap
Water
Clean Rags
Dry Towel
Phillips Head Screwdriver
Pliers
Alcohol or Lens Cleaning Wipe
Photocell Cleaning
1. Disconnect the photocell cable from the
connector on the back of the display.
2. Remove the screws used to mount the
photocell to the display.
3. Use pliers to remove the four plate
assembly nuts. Refer to Figure 2.
4. Starting from the bottom of the photocell
assembly, carefully remove the plates
from the plate assembly bolts. Set the
plates in the order they were removed so
the photocell can be reassembled in the
same order. Refer to Figure 2.
5. Using soapy water and a rag, wipe all the
dirt and debris from the plate surfaces.
Use extreme caution not to damage the
Sensor PCB when working on the plate
that contains the PCB. Refer to Figure 2.
6. Rinse the clean plates off with clean
water.
7. Carefully wipe off the photocell eye with
an alcohol wipe or a lens cleaning wipe.
Refer to Figure 3.
Figure 1: Dirty Photocell
Figure 2: Photocell Assembly
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - Photocell Cleaning

Quick Guide: Digital Billboard Photocell, Light Sensor, and Webcam Cleaning Procedures 1 of 3 PO Box 5128 331 32nd Ave, Brookings, SD 57006-5128 tel

Seite 2 - Cleaning

Quick Guide: Digital Billboard Photocell, Light Sensor, and Webcam Cleaning Procedures 2 of 3 PO Box 5128 331 32nd Ave, Brookings, SD 57006-5128 tel

Seite 3 - Panasonic Webcam Cleaning

Quick Guide: Digital Billboard Photocell, Light Sensor, and Webcam Cleaning Procedures 3 of 3 PO Box 5128 331 32nd Ave, Brookings, SD 57006-5128 tel

Kommentare zu diesen Handbüchern

Keine Kommentare