Daktronics Track & Field Interfaces Bedienungsanleitung PDF herunterladen (Seite 12)

6 FinishLynx Photo Finish System

 Baud: 9600

 Data Bits: 7

 Parity: Even

 Stop Bits: 2.0

 Running Time: Normal

 Auto Break: Off

 Results: Auto, Always send place enabled

 Paging enabled; set the Size to the number of lanes that can be displayed on the

scoreboard (ex, 4 for a four line scoreboard).

2.4 DMP-7000 (Venus 7000) or V-Play Controller Setup Via Serial

Reference Drawings:

System Riser: F.Lynx/Hytek/Venus Via Comm Ports .......................... Drawing B-127739

In this setup, RTD (Real Time Data) is

sent from the FinishLynx system to the

DMP-7000 (Venus 7000) or V-Play

controller via serial port. The cabling

should go according to Drawing

B-127739.

If an All Sport 5000 is used, enter code

8604.

Set up the scoreboard options on the

FinishLynx computer as follows

(refer also to Figure 7):

 Script: “Dak.lss”

 Name: “Scoreboard”

 Code Set: Single Byte

 Serial Port: Select an available

COM port.

 Baud: 9600

 Data Bits: 8

 Parity: None

 Stop Bits: 1.0

 Running Time: Normal

 Auto Break: Off

 Results: Auto, Always send place enabled

 Paging enabled; set the Size to the number of lanes that can be displayed on the

matrix display; Time “3.0”

Figure 7: Scoreboard Options for Venus/V-Play Via Serial

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Keine Kommentare

Daktronics Track & Field Interfaces Bedienungsanleitung Seite 12