Daktronics ScoringTiming Interface (DSTI) Bedienungsanleitung

Daktronics Scoring- Timing Interface (DSTI) Software Operation Manual ED-13009 Rev 2 – 20 September 2012 201 Daktronics Drive PO Box 5128 Brooki

4 DSTI Setup 2.3 End-User Configuration Port Connection Setup Make sure all cables are routed from every device that will interface with the DSTI

DSTI Setup 5 2.5 Menu Options File Menu  Print: Prints out the current sport configuration on a local printer.  Print Preview: This option

6 DSTI Setup Control Menu  Update Press Monitors and Update RTD Outputs: Ensures the latest information is being sent by the DSTI software to its

DSTI Setup 7 2.7 Button Panel Area The button panel area (Figure 5) consists of two drop-down boxes and five buttons; Sport, Interface, View Con

8 DSTI Setup Venus 1500 Display (DakStats Only) Click Venus 1500 Displays to select which stats will be sent to the Venus 1500 control system (Figu

DSTI Setup 9 Press Row Monitors (DakStats Only) Click Press Row Monitors to configure the port used by press row monitors. 1. In the Configure

10 DSTI Setup Start/Stop Switch (DakStats Only) Click Start/Stop Switch to configure a port for the All Sport 5000 console start/stop switch. This

Testing DSTI Communication 11 Section 3: Testing DSTI Communication After the DSTI is connected and running, set the configurations for the current

12 DSTI Setup  Before starting a game in IDS or Stat Crew, go to Edit > Clear Stats Data to clear the data out of the system from the previous

Troubleshooting 13 Section 4: Troubleshooting The DSTI connects consoles and statistic software with output devices used to display information. To

14 Troubleshooting Incorrect or Incomplete Stats If the stats are incorrect or incomplete, use the following steps:  All Sport Interface: Go to

ED-13009 P1092 Rev 2 – 20 September 2012 DAKTRONICS, INC. Copyright  2011 All rights reserved. While every prec

Table of Contents i Table of Contents Table of Contents ...

Introduction 1 Section 1: Introduction This manual is designed to assist in the installation, configuration, and operation of the Daktronics Sco

2 Introduction Minimum:  Microsoft® Windows 95™  333 MHz CPU  64 MB RAM  10 MB free disk space  2 available COM ports  Local Area Netwo

DSTI Setup 3 Section 2: DSTI Setup 2.1 Installation To install the software, follow the steps below: 1. Go to dakfiles.daktronics.com/download