Daktronics Rodeo Interface with Daktronics Matrix Displays Bedienungsanleitung PDF herunterladen (Seite 23)

Venus 7000 Connection Methods 17

1. On the Venus 7000 Shell, click

Configure, and then click on the

RTD Inputs tab.

2. Double-click Input 1 and set up the

port as follows:

Port 1

If DCS is not used (Figure 20) -

Name: “OmniSport”

Source Type: COM PORT

Baud Rate: 19200

Source: COM1

Parity: None

Protocol: Enhanced

Data Bits: 8

Size: “1024”

Default Input Template:

OS2-RODEO.itf

Note: COM port numbers may vary

based on the actual port(s) available on the computer.

If DCS is used (Figure 21) -

Name: “OmniSport”

Source Type: UDP/IP SOCKET

Source: “3002”

Protocol: Enhanced

Size: “1024”

Default Input Template:

OS2-RODEO.itf

Click OK when finished.

Figure 20: Edit RTD Input1

Figure 21: Edit RTD Input1 (DCS Method)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 44 45

Keine Kommentare

Daktronics Rodeo Interface with Daktronics Matrix Displays Bedienungsanleitung Seite 23