Daktronics TI-2025 Segment Timer Bedienungsanleitung PDF herunterladen (Seite 11)

Mechanical & Electrical Installation 5

Section 3: Mechanical & Electrical Installation

Reference Drawings:

System Riser; TI-2025 Segment Timer .................................................. Drawing A-274283

3.1 Mechanical Installation

The scoreboards in this manual are portable and are equipped with a handle on the top for

easy transport.

Note: The handles are designed for carrying only and are not to be used as a temporary

hanger or for permanent mounting.

3.2 Power & Signal

The displays receive power through a 120 V AC power cord. The power cord plugs into a

standard three-pronged outlet. Flip the switch on the side of the display to power it on. The

display will remain blank until it receives signal from a controller.

Signal is provided in one of two ways: 1) via a 9-pin serial to 4-pin XLR cable (Daktronics part

number 0A-1196-0095) connected to the J31 signal input on the side of the display from the

top of the All Sport 100 console or 2) via radio transmission from the RC-50 controller to the

built in antenna. Refer to Drawing A-274283.

Note: Before using the RC-50, the All Sport 100 must first be connected to the timer in

order to set the practice values as described in the All Sport 100 Control Console

Operations Manual (ED-13432). Then the RC-50 can be used to run the practice from

anywhere on the field without being constrained by control cable.

Extension XLR cables are available from Daktronics.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Daktronics TI-2025 Segment Timer Bedienungsanleitung Seite 11